Why are LED stadium lights the best choice

When selecting stadium lighting to be installed in stadiums, do not focus only on short-term solutions to the problems of installed lighting. Its aim should be to improve the quality of future venues, as well as to ensure maintenance costs are always within budget.

Compared with metal halide sports lamps, LED sports lamps have obvious advantages

Both goals can be achieved with the Hishine Stadium lights. Therefore, choosing the right LED sports lights for your stadium is very important for a successful business plan.

Why should I choose LED lights over halogen lights?

In order to understand how light is produced, it is important to understand the lighting process of the two lamps. The first occurs before the electricity reaches the LED bulb and can be considered a power consumption process. The second occurs a little later, through the projection of light.

A. Power consumption process
By energy consumption we mean the percentage of energy used, which is critical to turning on a light. In a typical halogen lamp, up to 80% of the energy is wasted in the power generation process. Using our LEDS, the wasted energy is less than 10%, so our sports LED lighting will require less power and will achieve brightness beyond that provided by halogen lighting.

B. Light projection process
The lighting process is the second stage. Once the light source is turned on, you need to project the light at a great intensity to the ground. This is where the distinction between luminosity and efficiency is very important.

Are high-power LEDS more efficient because they are so bright?
The answer to that question is simple: no. For LED lights, the most important thing is not how bright they are, but how far they can project their brightness. If the lights are very bright for the first 5-10 metres but taper off after this distance, then the light reaching the pitch will be quite low, which should be taken into account that for sports lighting fixtures are usually installed on high pillars.

So we have to consider not only luminosity, but also how light travels over distance. Luminosity is a relevant factor, but not the only one to consider.

How is this travel capability achieved?
Key elements that generate high levels of light are the main purpose of motion LED lighting. Geometric optics, which treats light as a set of straight rays that bend when crossed or reflected off a surface.

Therefore, when making and installing each lens used for stadium lighting, it is crucial to maximize the analysis of how the light leaves the fixture and projects it in a particular direction in a particular way. This is achieved through mathematical combinations and procedures of light simulation. All of this we (LED lighting experts) do most accurately, thanks to our professional master engineering department. If leds are more concentrated, less light will be scattered or wasted when you move away from the fixture.